ActoBitty raden efter Robot
Lär hur man bygger en linje efter robot med hjälp av ActoBitty och en Arduino. Nedan är en lista av hårdvara för att slutföra denna bygga.
Maskinvara som krävs
1 x Actobitty 2 hjul Robot Kit (https://www.servocity.com/html/actobitty_2_wheel_robot_kit.html)
1 x Arduino Uno (http://arduino.cc/en/Main/arduinoBoardUno)
1 x Pololu DRV8835 Motor Driver sköld (http://www.pololu.com/product/2511)
1 x Pololu kv-1RC reflektans Sensor (2-Pack) (http://www.pololu.com/product/2459)
4 x hane-hona Jumper tråd (http://www.digikey.com/product-detail/en/MIKROE-512/1471-1231-ND/4495595)
2 x hona-hona Jumper tråd (http://www.digikey.com/product-detail/en/MIKROE-511/1471-1230-ND/4495594)
2 x #2 x 1/4" Pan huvud Philips skruvar (http://servocity.com/html/_2_pan_head_phillip_screws.html)